Additional Product Info


Blade Specs:-
· Blade rating- Polycarbonate blade, Standard combat and sparing capable. (Not rated for extreme combat)
· Blade Tip - Slightly frosted pitted tip glued in place.
· Blade Base - Clear base cap glued in place.
· Blade Length - 32 Inches long.
· Blade Width - 24mm.
· Removable Blade - Untighten locking nut in rear of handle.
· Removable Blade - Interchangeable with other ForceSaber blades.
· No Clash On Clash Effects?



​General Product Information:-

All ForceSabers are bespoke custom handmade to order. As this Saber is handmade there are unavoidably slight cosmetic scratches or imperfections on the handle or blade. Due to the construction of the internal blade housing there will be heavy scratch in this area but it will have no effect on the blade or use of the saber. The raw materials may also come with imperfections or marks. All switches are glued in place, the switch will not come lose but there can be residual glue around the switch. When being used these imperfections / points will have no effect or impact on the use of the item. 

Every ForceSaber uses a pre-coloured bespoke high powered LED. This LED powers the blade and gives the blade the required colour needed, these look amazing in low light (dusk) but in direct sunlight or bright day light it will not be 100% visible. We use a single powerful LED which has a high light output with very low power consumption.

All ForceSabers without SFX operate with a standard battery setup. Standard setup is a setup that uses regular 4 x AAA batteries to power your ForceSaber. (4 x AAA batteries are not supplied). We advise to use Alkaline batteries for best results.

If the individual listing states + SFX this means the model on this listing has sound effects installed. For models without this they will not have sound installed.




Important!
Do not leave the blade exposed to direct sunlight for prolonged periods of time as this will alter the translucent glue in the blade tip.

When replacing the blade DO NOT overtighten the “Micro Screw”. If over tightened, this could lead to damage of the thread. (This is not covered under the returns policy)
 


Please Note:- 
When purchasing this product you are confirming  you have read and agreed to all the information provided.

All Rights Reserved ForceSabers UK Copyright 20.07.2017 – Present Day   | Not associated or affiliated with LUCASFILM LTD. Or any LFL or Ltd, Film or Lightsaber Franchise. ForceSabers UK